BackToCAD Technologies LLC, Clearwater, USA | Artificial Intelligence and Software Developing | Atlanta, USA; Stuttgart, Germany | Kazmierczak® Company
Drawing elliptical arcs
An elliptical arc is a portion of an ellipse. The default method for drawing an elliptical
arc is to specify the endpoints of one axis of the ellipse, and then specify a distance
representing half the length of the second axis. Then you specify the start and
end angles for the arc, measured from the center of the ellipse in relation to its major
axis. You can draw elliptical arcs using any of the following methods:
To draw an elliptical arc by specifying the axis endpoints
1 Do one of the following to choose Elliptical Arc Axis-Axis ( ):
• On the ribbon, choose Home > Elliptical Arc Axis-Axis or choose Draw > Elliptical
• On the menu, choose Draw > Elliptical Arc > Elliptical Arc Axis-Axis.
• On the Draw toolbar, click the Elliptical Arc Axis-Axis tool.
• Type ellipse and then press Enter, and then type a (for Arc) and press Enter.
2 Specify the first endpoint.
3 Specify the second endpoint.
4 Specify the half-length of the other axis.
5 Specify the start angle of the arc.
6 Specify the end angle.
CAD.direct 2019 draws elliptical arcs in the direction you specify.
Go to Tools > Drawing Settings > Drawing Units tab. Under Change Settings For,
select Angular Units. The default setting is counterclockwise.
© Copyright 2017 Expert Robotics Inc. USA . All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. CAD.direct 2019 is a trademark of Expert Robotics Inc. Print2CAD and CAD2Print are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press, or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.